Section 1

Colors

Paint, stain, shingles, and metal — choose the look that's right for you

Colors

Paint Colors

Our standard paint colors are Sherwin Williams semi-gloss, applied in two coats over primed LP Smart Siding. Need a different color? We can match any Sherwin Williams color — just bring us the SW number or a paint chip.

Fireweed

SW 6328

Tricorn Black

SW 6258

Cobble Brown

SW 6082

Rosemary

SW 6187

Amaryllis

SW 6591

Indigo

SW 6531

Web Gray

SW 7075

African Gray

SW 9162

Gray Matters

SW 7066

Extra White

SW 7006

Navajo White

SW 6126

Universal Khaki

SW 6150

Moth Wing

SW 9174

Dard Hunter Green

SW 0041

Great Falls

SW 6495

Custom color matching: For any color not listed here, we can match it through Sherwin Williams. We need the SW number of the color, or a physical paint chip. Note: a fee applies for custom color mixing and pickup. No discounts are given for customer-supplied paints.

Colors

Stain Colors

Cedar buildings and log-and-lap siding are finished with a Sherwin Williams DeckScape two-coat stain process — a base coat followed by a UV-protective finish coat. Three standard stain colors are available.

Special-order stains: We can special-order stain colors to match your existing building or taste, for an additional charge. Contact us for details.

Colors

Shingle Roofing

Shingle roofing is available in three standard colors — Onyx Black, Driftwood, and Estate Gray. The shingle samples appear in the lower half of the stain/shingle chart above. Custom color and style matching may be possible depending on availability, requiring a custom quote per job.

Custom shingle colors: Custom color and style matching can be possible if available — requires a custom quote per job.

Colors

Weather Master Metal Colors

We use #1 Weathermaster Ag Panel metal in 16 standard colors. One premium color — Copper Penny — is available for an additional upcharge. Metal panels carry a 40-year manufacturer warranty.

Copper Penny is available at an upcharge. All other colors shown above are included at standard pricing. Colors may vary slightly from screen — visit our lot to view physical samples.

Section 2

Options

Upgrades and add-ons to customize your building inside and out

Doors

Every standard storage building comes with a 72" double door. We offer four additional door styles, plus roll-up garage doors for larger buildings.

Standard door: 72″ double door — included with every building.

Additional door options:

72″ extra double door
72″ double door with transom
36″ wood single door
36″ 6-panel or 9-lite door

Roll-Up Garage Doors: 9′ wide × 6′6″ tall. Can only be installed in 12′ and 14′ wide buildings. Garage doors cannot be installed on the sides of buildings, except on the Studio model.

Available sizes: 7×7 and 9×8′
Note: On 10′ wide buildings, the 7×7 roll-up door will only be 7′×6′6″ in size.

Windows

Our standard window is a 2×3 single-pane, single-hung aluminum-framed window (white or brown), trimmed with a 1×3. A wide range of aluminum and insulated vinyl options are available.

Aluminum Windows

Insulated Vinyl Windows

Vents

Proper ventilation keeps your building dry and comfortable year-round.

Standard vent: 8″×16″ gable end vent — included as standard on all buildings.

Optional upgrade: 3′ ridge vent sections can be added along the ridge line for improved airflow and moisture control.

Insulation

Insulation makes your building comfortable year-round and helps protect stored items from temperature extremes. Four insulation options are available.

Double Bubble (R7) — Layered plastic vapor barrier. Great as a basic moisture and thermal barrier. Priced per sq. ft.
Batten Fiberglass (R13) — Standard batt insulation, one of the most common options. Priced per sq. ft.
2″ Vinyl Back (R13) — Vinyl-faced insulation for a cleaner interior look. Priced per sq. ft.
Open Cell Foam Spray — Expands to fill every gap for superior air sealing. Priced per board ft.
Closed Cell Foam Spray — Highest R-value per inch, excellent moisture resistance. Priced per board ft.

Wall Framing & Deadwood

Framing upgrades and interior deadwood let you customize and finish the inside of your building the way you want.

Wall Framing: Framing the interior walls is priced per linear foot of wall. To add OSB sheathing to the framed walls, there is an additional charge per linear foot of wall per side.

Deadwood: Our buildings do not come standard with deadwood — the additional blocking needed to nail or fasten interior paneling, sheetrock, or other wall finishes. If you plan to finish the interior, you will need corner studs and extra ceiling joists added. Call our corporate office for pricing.

Floors

All buildings come with a solid standard floor. An upgrade to a thicker, higher-performance subfloor is available for workshops, studios, and heavy-use applications.

Standard floor: 5/8″ T&G subfloor on 2×6 pressure-treated floor joists, spaced 16″ on center. The floor joists are pressure treated to protect against termites and moisture.

Upgrade to 3/4″ subfloor (Advantech): We do not use pressure-treated plywood for upgrades because it swells and delaminates when soaked in treatment. Instead we use 3/4″ Advantech or equal — it looks great and doesn’t swell or shrink. Priced per linear foot of floor length.

12″ OC floor joist upgrade: Tighten the joist spacing from 16″ to 12″ on center for extra stiffness under heavy loads. Priced per linear foot of floor.

Loft

Lofts dramatically increase storage capacity by making use of the overhead space inside your building. They can be placed on the ends or sides of the building.

Standard loft: 4′ deep — can be placed on the ends or sides of the building. Priced per linear foot for a 4′ loft.

Deeper lofts: Lofts can go beyond the standard 4′, up to 8′ deep. A loft deeper than 4′ (e.g., 6′ or 8′) is priced at double the 4′ rate.

Loft ladders: Loft ladders are sold separately and do not come attached, so they can be repositioned or removed as needed.

Shelves & Workbench

Shelves and workbenches keep your tools and supplies organized and off the floor. Shelves can be placed on any wall, under windows, or under lofts.

Standard shelves: Typically made from 7/16″ OSB, approximately 17″ deep.

Workbench (single shelf): 36″ high — priced per linear foot.

Double shelf: A second shelf approximately 20″ above the workbench top — priced per linear foot.

Shelves can be single, double, or as many as needed. If you want a custom spacing arrangement, let us know the measurements when ordering.

Interior Finish

Finishing the interior walls gives your building a clean, polished look and makes it more comfortable to work or spend time in. Three materials are available, all priced per square foot of floor.

T1-11 Siding — Grooved LP siding applied to the interior walls for a classic look. Priced per sq. ft. of floor.
OSB (Oriented Strand Board) — An affordable, sturdy choice that holds screws well for hanging shelves and accessories. Priced per sq. ft. of floor.
1×6 Pine — Tongue-and-groove pine boards give a warm, cabin-like feel. A premium option that looks great in studios, offices, and she sheds. Priced per sq. ft. of floor.

Note: All interior finish prices are per square foot of floor. Deadwood (corner studs, extra ceiling joists) may be required before interior finish can be applied — see the Wall Framing & Deadwood section above.

Options & Colors

Ready to Design Your Building?